Perspecta D

• Description
  The Perspekta ceiling system is composed of modular profiles and panels that can be parallel or perpendicular to each other. The system is available in different sizes and options. Due to their monolithic appearance, Perspekta panels can be used for modern architecture. All Perspekta panels can be easily disassembled without tools. The Perspekta system is suitable for large spaces, such as offices and airports.
• Details
  

  

  

  
• Acoustics

  The metal ceilings of Integra can be supplied with an acoustic fleece and / or sealed stone or glass wool. In addition to its technical performance, the acoustic insert can also be perceived as part of the architectural design with its visible surface.

  Color options: black / white / gray
  Standards and Guidelines

  The measurements were carried out in accordance with the quality manual of the Laboratory for Acoustics and the following standards:

  ISO 354: 2003[1]

  Acoustics and Measurement of sound absorption in a reverberation room.

  Note 

  The ISO 354 standard has been accepted in all EU countries as European Standard EN 354: 2003

  From the measurement results, which are displayed in thirds from 100 to 5000 Hz, some single number designationsbeing calculated. The following standards are used for this:

  ISO 11654: 1997

  Acoustics - Silencers for use in buildings - Rating of sound absorption

  ASTM C423

  Standard test method for sound absorption and absorption coefficients by the reverberation room method.

  Integra metal panels meet the required level of absorption (NRC). The acoustic performance reports can be downloaded from our website.

  ---

  [1] This standard states that for each measurement the average reverberation time of the empty reverberation room and of the reverberation room with the material to be investigated must be indicated per frequency band in the report.

  In order not to burden the client with a large series of figures that are not relevant to assess the quality of the product, these have been omitted from this report. Naturally, these figures can be provided afterwards at the request of the client.

• Accessories
  

  

  

  

  

  

  
• Installation scheme

  PERSPEKTA 'C-BAND GRID' SYSTEM

  PROFILE / ACCESSORIES	PRODUCT CODE	QUANTITY MODULE 600X1.800 mm
  D-Bandraster profile	DBP-100-L3600	0,56 pcs / m2
  Length connector	DBP-ZL-100	0,21 pcs / m2
  Clamping spring	KT-40	2,00 pcs / m2
  L-clamp angle line	WL-3000	0,70 mt / m2
  Nonius part	DBP-100-NA	1,00 pcs / m2
  Nonius upper part	NU-100	1,00 pcs / m2

   

• Types
  • band grids

    Integra Perspekta D Bandraster System, unlike the other Integra Perspekta Systems, involves the use of D Bandrasters.

    

• Specifications

  Material		Galvanized steel, stainless steel and aluminum
  Thickness		0,6 to 1,0 mm.
  Edges		Sharp-edged (Default)
  Beam		200 mm to 1200 mm
  Length		200 mm to 3000 mm
  Color		RAL9006, RAL9010 and RAL9016 - if desired, production is possible in all other RAL colors and NCS colors. - if desired, special anti-bacterial paint is possible for places where hygiene is important. - if desired, panels with a wood motif can be produced. - For more information see colors.
  Perforation		Ø 0.7, Ø1.5, Ø1.8, Ø2,5 (standard), Ø3.0, Ø4.5, Ø6.0, Ø7.0, Ø12.0, Ø16.0, 8 x 8 square. For more information see Perforations.
  Acoustics		NRC: 0.60 to 0.90 For more information see Reports.
  Inlay		Acoustic fleece (Soundtex), Sealed rock wool or polyester fiber mat
  fire class		Fire reaction group A2-s1, d0.
  Technical standards		- ceiling panels are supported by the clip-in system, which are produced according to European, American and TAIM (Technical Association of Industrial Metal Ceiling Manufacturers) standards, which are produced in our factory according to ISO 9001.2008, TSE certificates. - panels are tested according to the EN 13501-1 standard.
  Options		Panels can be fitted with a folding option

• Project photos