Contact us via WhatsApp +31 6 12 20 85 70

System ceilings

Perspecta C

Perspecta C

  • Description

    The Perspekta ceiling system is composed of modular profiles and panels that can be parallel or perpendicular to each other. The system is available in different sizes and options. Due to their monolithic appearance, Perspekta panels can be used for modern architecture. All Perspekta panels can be easily disassembled without tools. The Perspekta system is suitable for large spaces, such as offices and airports.

  • Details
  • Acoustics

    The metal ceilings of Integra can be supplied with an acoustic fleece and / or sealed stone or glass wool. In addition to its technical performance, the acoustic insert can also be perceived as part of the architectural design with its visible surface.

    Color options: black / white / gray
    Standards and Guidelines

    The measurements were carried out in accordance with the quality manual of the Laboratory for Acoustics and the following standards:

    ISO 354: 2003[1]

    Acoustics and Measurement of sound absorption in a reverberation room.


    The ISO 354 standard has been accepted in all EU countries as European Standard EN 354: 2003

    From the measurement results, which are displayed in thirds from 100 to 5000 Hz, some single number designationsbeing calculated. The following standards are used for this:

    ISO 11654: 1997

    Acoustics - Silencers for use in buildings - Rating of sound absorption


    Standard test method for sound absorption and absorption coefficients by the reverberation room method.

    Integra metal panels meet the required level of absorption (NRC). The acoustic performance reports can be downloaded from our website.

    [1] This standard states that for each measurement the average reverberation time of the empty reverberation room and of the reverberation room with the material to be investigated must be indicated per frequency band in the report.

    In order not to burden the client with a large series of figures that are not relevant to assess the quality of the product, these have been omitted from this report. Naturally, these figures can be provided afterwards at the request of the client.

  • Accessories
  • Installation scheme



    600X1.800 mm

    C-Bandraster profile CBP-100-L4000 0,56 pcs / m2
    Length connector CBP-ZL-100 0,21 pcs / m2
    Clamping spring KT-40 2,00 pcs / m2
    L-clamp angle line WL-3000 0,70 mt / m2
    Nonius part CBP-100-NA 1,00 pcs / m2
    Nonius upper part NU-100 1,00 pcs / m2


  • Types
    • band grid

      Integra Perspekta C Bandraster System involves the use of C bandrasters between the panels. Beside aesthetics, C bandrasters also carry the adjacent panels and therefore they are part of the suspension system. The panels can be produced for all kinds of architectural design, with different material and color options. Production of bandrasters with different dimensions other than stated is possible. All Integra Plank Perspekta panels can be demounted easily without the need for any tool.

    • Band grid Nonius

      Integra Pespekta C Bandraster Nonius is offered when the system needs to be substantially rigid. Such a solution meets aesthetics as well as functional demands of the designers. The suspension system is strengthened by the use of vernier hangers.

    • Bandraster Hinge Down

      Integra Perspekta C Bandraster Hinge Down Panels can be swung down from the ceiling by hanging from hinges at the profile edges. In areas where frequent and quick access is needed, hinge-down panels offer a significant advantage.

  • Specifications
    Material Galvanized steel, stainless steel and aluminum
    Thickness 0,6 to 1,0 mm.
    Edges Sharp-edged (Default)
    Beam 200 mm to 1200 mm
    Length  200 mm to 3000 mm
    Color RAL9010, RAL9016 and RAL9006
    - if desired, production is possible in all other RAL colors and NCS colors.
    - if desired, special anti-bacterial paint is possible for places where hygiene is important.
    - if desired, panels with a wood motif can be produced.
    - For more information see Colors.
    Perforation Ø 0.7, Ø1.5, Ø1.8, Ø2,5 (standard), Ø3.0, Ø4.5, Ø6.0, Ø7.0, Ø12.0, Ø16.0, 8 x 8 square.
    For more information see Perforations.
    Acoustics NRC: 0.60 to 0.90
    For more information see Reports.
    Inlay Acoustic fleece (Soundtex), Sealed rock wool or polyester fiber mat
    fire class Fire reaction group A2-s1.d0.
    Technical standards



    - ceiling panels are supported by the clip-in system, which are produced according to European, American and TAIM (Technical Association of Industrial Metal Ceiling Manufacturers) standards, which are produced in our factory according to ISO 9001.2008, TSE certificates.

    - panels are tested according to the EN 13501-1 standard.

    Options Panels can be fitted with a folding option
  • Project photos
web design development