NormaGrid fulfills the fully aesthetic and functional expectations of architects. The system offers the possibility to create different geometric patterns with bandraster profiles. It is available in various sizes. NormaGrid panels can be disassembled without tools. NormaGrid is the ideal system for spaces such as offices and airports, where both aesthetic and functional requirements are set.
- Different geometric design alternatives
- Easy to disassemble
- Integration with lighting is applicable
- Various bandraster options
The metal ceilings of Integra can be supplied with an acoustic fleece and / or sealed stone or glass wool. In addition to its technical performance, the acoustic insert can also be perceived as part of the architectural design with its visible surface.
Color options: black / white / gray
Standards and Guidelines
The measurements were carried out in accordance with the quality manual of the Laboratory for Acoustics and the following standards:
ISO 354: 2003
Acoustics and Measurement of sound absorption in a reverberation room.
The ISO 354 standard has been accepted in all EU countries as European Standard EN 354: 2003
From the measurement results, which are displayed in thirds from 100 to 5000 Hz, some single number designationsbeing calculated. The following standards are used for this:
ISO 11654: 1997
Acoustics - Silencers for use in buildings - Rating of sound absorption
Standard test method for sound absorption and absorption coefficients by the reverberation room method.
Integra metal panels meet the required level of absorption (NRC). The acoustic performance reports can be downloaded from our website.
 This standard states that for each measurement the average reverberation time of the empty reverberation room and of the reverberation room with the material to be investigated must be indicated per frequency band in the report.
In order not to burden the client with a large series of figures that are not relevant to assess the quality of the product, these have been omitted from this report. Naturally, these figures can be provided afterwards at the request of the client.
INSTALLATION SCHEDULE NORMA-GRID SYSTEM
PROFILE / ACCESSORIES PRODUCT CODE QUANTITY MODULE
C profile PB 100 K2 1,38 pcs / m2 Box CZK-100 0,70 pcs / m2 Threaded rod or vernier ATJ-100 0,70 pcs / m2 Bolt nut CDS 60 0,70 pcs / m2
Material Galvanized steel, stainless steel and aluminum Thickness 0,6 to 1,0 mm. Edges Sharp-edged (Default) Beam Panels 800 mm to 1200 mm, Bandraster profiles 100 to 200 mm Length Panels 800 mm to 1200 mm, Bandraster profiles 100 to 1.200 mm Color RAL9006, RAL9010 and RAL9016
- if desired, production is possible in all other RAL colors and NCS colors.
- if desired, special anti-bacterial paint is possible for places where hygiene is important.
- if desired, panels with a wood motif can be produced.
- For more information see colors.
Perforation Ø 0.7, Ø1.5, Ø1.8, Ø2,5 (standard), Ø3.0, Ø4.5, Ø6.0, Ø7.0, Ø12.0, Ø16.0, 8 x 8 square.
For more information see perforation.
Acoustics NRC: 0.60 to 0.90
For more information see reports
Inlay Acoustic fleece (Soundtex), Sealed rock wool or polyester fiber mat fire class Fire reaction group A2-s1.d0. Technical standards - ceiling panels are supported by the clip-in system, which are produced according to European, American and TAIM (Technical Association of Industrial Metal Ceiling Manufacturers) standards, which are produced in our factory according to ISO 9001.2008, TSE certificates.
- panels are tested according to the EN 13501-1 standard.
Options Panels can be fitted with a folding option
- Project photos